Your life could be better with Trans

The flexibility of structure determines the variability of H series.

Flexible opening mode can hold any construction situation to the greatest extent

Fully upgraded configuration, fully optimized performance

Enjoy the convenience by intelligent homelift anytime and anywhere

New balance frame structure

Double suspended system is adopted at the top of the balance structure, which balances the force, by avoiding the unbalanced load problem existing in the traditional backpack-like structure. The system can ensure smoother operation with lower noise and easier, maintenance and thus prolongs the service life of the elevator. Steel belt transmission Use steel belt transmission instead of traditional wire rope Increase safety performance while substantially reducing noise.

Steel belt technology

Through independent research, TRANS has upgraded its H series elevators which are equipped with higher strength and practicability by replacing the wire rope with steel belt.

1.The large contact surface between the steel belt and the motor permit the efficient transmission.
2.No need for regular maintenance, the internal grease dirt can be cleaned.
3.The flexibility of the steel strip greatly reduces the vibration caused by elevator operation.
4.The composite steel belt is 20% lighter than traditional ones.
5.The traction machine is small, easy to install and to save building space.

Steel belt motor

H series steel belt motor is a special
elevator drive motor for H series.
A month's electricity bill is 2 RMB

Steel belt broken wire detection system

In order to further guarantee the customers' safety, H series elevator adopts the detection system for steel wire rope by fixing the detector on both ends of the steel belt. If any wire rope is broken, the detector loop will be disconnected and feed back the information to the control cabinet which will immediately disconnect the power and stop the operation to ensure the passengers' safety.

1 2
Wire break detector gap
3 4
Detector circuit box
5
Elevator controller

In this circuit, when the wire rope is broken, the circuit is cut out and the controller makes the elevator stop operating.


Braking devices

Braking devices are installed at the bottom and top of H Series elevator for maintenance and safety. The UKT switch is in action when it is close to the counterweight guardrail during normal operation. While maintaining the elevator, the service technician loosens a bolt and then spin the device out. By doing so, Safety circuit is disconnected.

Car decoration

Free of collocation, free of choice

LC003-02

LC003-07

LC005

LC007

LE001

LE002

LE004

LE005

LE006

LE007

LE008

LE009

LM001

LM002

LM003

LM005

LMS001

LMS002

LMS003

LMS004

LMS006

LMS007

LMS008

LMS009

LMS010

LMS011

LMS012

LMS013

LNC001

LNC002

LNC004

LC001

LC002

LC003-01

LC003-03

LC003-04

LC003-06

LC004

LC006

LM004

LMS014

LMS015

LNC003

SW001

SW002

SW003

SW004

SW005

SW006

SW007

Wonderful showcase for you to know more about your choice

Know more details, please download brochures

  • Sharing and attention

Subscribe to TRANS

Telephone: 400-962-8188 E-mail: info@translift.com.cn
Copyright © Suzhou Trans Elevator Co., Ltd.